Netduino home hardware projects downloads community
 
 
tech specs        accessories         buy now
technical specifications
product size
in the bag
  ● netduino 3 wi-fi
  ● four sticky feet
  ● 5 cm gobus cable
system requirements
Windows
  ● Windows 7 SP1, 8 or 10 (32 or 64 bit)
Recommended: Windows 10
Mac OS and Linux
  ● Parallels
Serial deployment and partial USB support
Requires copy of Windows in virtual machine
  ● VMWare Fusion or Oracle VirtualBox
Serial deployment and partial USB support
Requires copy of Windows in virtual machine
  ● Experimental Mono (native) support
Future native Mac OS and Linux support provided by an experimental open source project
environmental
  ● operating temperature:
0 - 70 °C (32 - 158 °F)
  ● RoHS compliant
wireless certifications
  ● TI CC3100MOD rf certifications:
FCC, IC, CE, ETSI, and TELEC
processor and memory
  ● STMicro 32-bit microcontroller
  ● Speed: 168MHz, Cortex-M4
  ● Code Storage: up to 1408 KB
  ● RAM: 164+ KB
microcontroller documentation

STM32F427VI (datasheet)
STM32F427VI (reference manual)
buttons and leds
led colors
  ● power led: white
  ● user led: blue
  ● wi-fi led: green + yellow
button features
  ● functions as a reset button (default)
  ● can be used as GPIO input
design files and source code
design files (open source)
  ● netduino 3 wi-fi schematics
  ● netduino 3 wi-fi board layout
source code (open source)
  ● .NET Micro Framework v4.3.1 source
  ● netduino 3 wi-fi firmware v4.3.2 source
input and output
digital i/o features
  ● all 22 digital and analog pins: GPIO
  ● digital pins 0-1: UART 1 RX, TX
  ● digital pins 2-3: UART 2 RX, TX/PWM
  ● digital pins 5-6: PWM, PWM
  ● digital pins 7-8: UART 3 RX, TX
(also works as UART 2 RTS, CTS)
  ● digital pins 9-10: PWM, PWM
  ● digital pins 11-13: PWM/MOSI, MISO, SPCK
  ● digital pin SD/SC: SDA/SCL
(also works as UART 4 RX, TX)
gobus ports
  ● 3 gobus 2.0 ports
networking
  ● wi-fi: 802.11b/g/n (2.4GHz)
security: open, WEP and WPA2
  ● encryption: SSL 3.0 and TLS 1.2
  ● network stack: Netduino.IP hybrid
storage
  ● micro sd (up to 2 GB)
  ● auto card detect
power
  ● input: 7.5 - 12 VDC or USB powered
  ● output: 5 VDC and 3.3 VDC regulated
  ● max current: 25 mA per pin
microcontroller max current: est. 125 mA total
  ● digital i/o are 3.3 V--but 5 V tolerant
internal pull-ups/pull-downs are 3.6 V tolerant
 
home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.